Dr. Fred, Your Stain Sponge product is great. One of my clients called with a problem of large stains from candle wax on a hearth brick. It left usgly discoloration. I applied three bags per your instructions and bingo, the client called this morning announcing hapilly that the stain has gone after only one application. Being in the stone care industry for 20 years I can say that this product will be an asset in our arsenal of stain removers and we will resell it to our clients.

 

Don Harari

Royal Care Services, Inc.

Encino California

 

 

Removing stains from natural stone and masonry has never been easier! Just wet the sponge with water, place it over your stain and let it dry, then remove the sponge and the stain is gone!

 

After years of research and experiments, Dr. Fred Hueston, of Stone Forensics, has created a unique product: the Stain Sponge. He has combined the necessary stone-safe surfactants and diatomaceous earths with the ease of a bag similar to those used in teabags, and invented the first easy-to-use poultice stain remover for stone products. By utilizing the stain process reversal technique, the patented Stain Sponge draws the stain from inside the stone. The bag is soaked in water and placed on the dampened stain, then covered with a piece of plastic wrap. A few holes are punched in the wrap to allow for slow drying of the bag. As the bag dries, the stain is drawn into the poultice inside the bag. After 12 to 24 hours, the bag should be dry, and is removed. There is no poultice powder to scrape off and scrub down. If additional treatments are needed (sometimes the case with serious stains), just use a new bag.

 

Manufactured in the U.S.A. by Dr. Fred's Innovative Solutions Patent pending Dr. Fred's Innovative Solutions