Stonecare PRO Signature HEAVY DUTY Tile & Grout Cleaner is a concentrated, heavy duty slightly acidic cleaner and restorer for deep cleaning of heavily soiled porcelain, ceramic and other non-natural tile and grout.

Application:

Wait a minimum of 7 days before cleaning newly grouted installations. Mask off any adjoining surfaces that may be damaged by acid.

1. Mix a solution of 1 part cleaner to 20 parts water.

2. Pre-wet the surface with a small amount of water.

3. Apply the mixed acidic solution and allow to stand for 1 or 2 minutes.

4. Agitate with a brush or white scrub pad.

5. Repeat the steps with clean water and scrub.

6. Remove all solution with a wet-vac.

CAUTION: Contains acid. Causes eye and skin irritation. Avoid contact with the skin, eyes and clothes. In case of contact, flush thoroughly with water. If irritation persists, seek medical attention. Do not swallow. Keep out of reach of children.

MSDS: Read MSDS for additional safety precautions before using this product. (Click here for Material Safety Data Sheet.)