Stonecare PRO Signature INTENSIVE is a concentrated, heavy duty alkaline cleaner and restorer for deep cleaning of heavily soiled natural stone tile and grout.
It will remove light coatings and won’t etch polished stone. INTENSIVE is formulated to quickly and effectively remove all soils, greases and oils that accumulate in grouted floors. It is a highly concentrated product and should be diluted prior to use. Always test in an inconspicious spot before using to insure surface is not adversely effected.
INTENSIVE removes build-up of greases and soils that are typically imbedded in stone floors and grout.
Coverage:
2750 ft/gallon
Application:
Protect all adjacent surfaces with masking film or plastic. Thoroughly wet area to be cleaned first. To deep clean, mix at 1 part cleaner to 10 parts water (13 oz. of product per gallon of water).To remove wax and light sealers, mix 1 part cleaner to 8 parts water (16 oz. per gallon). Let INTENSIVE act on the surface for a short time. Keep surface wet. You may scrub heavily soiled areas with a hard bristle brush. Rinse the floor with fresh water. Use a clean mop and pick up excess water with wet-vac or autoscrubber.
To deep clean, mix at 1 part cleaner to 10 parts water (13 oz. of product per gallon of water).To remove wax and light sealers, mix 1 part cleaner to 8 parts water (16 oz. per gallon). Let INTENSIVE act on the surface for a short time. Keep surface wet.
You may scrub heavily soiled areas with a hard bristle brush.
Rinse the floor with fresh water. Use a clean mop and pick up excess water with wet-vac or autoscrubber.
CAUTION:
Causes eye and skin irritation. Avoid contact with skin, eyes and clothes. In case of contact, flush thoroughly with water. If irritation persists, seek medical attention. Do not swallow. If ingested, drink large quantities of water to dilute. Seek immediate medical attention. Keep out of reach of children.
MSDS: Read MSDS for additional safety precautions before using this product. (Click here for Material Safety Data Sheet.)
